Sennheiser Ambeo VR - Ambisonic microphone

The professional microphone Sennheiser Ambeo

High performance

With a compact and elegant design, the Sennheiser Ambeo microphone is easy to handle and simple to use.

Very reliable, it is robust and has 4 KE14 capsules which allow it to offer a high-quality ultra-realistic spatial sound.

An ambisonic microphone for VR

Designed for a 360 ° spatial recording, its 4 capsules are arranged in a tetrahedral configuration to let the surrounding sound be captured at a single point.

Use your recordings as part of your VR project to make a real difference.

Can be used with other devices

Use your microphone with high-end software and devices such as recorders or binaural decoders.

Then restore your recordings via a virtual reality headset or VR applications.

Information

•     Frequency response: 20 Hz to 20 kHz
•     Maximum sound pressure level SPL: 130 dB (a) for 1 kHz
•     Transducer: pre-polarized condenser microphone
•     Connector: DIN12M - Use of the adapter necessary for conversion to 4x XLR3M Polarity: Pin1 (GND), Pin2 (+), pin3 (-).
•     Directivity: x4 cardioids in configuration A (1: front-left-up [FLU], 2: front-right-down [FRD], 3: back-left-down [BLD], 4: back-right-up [BRU])
•     Nominal independence: 200 Ω
•     Minimum load independence: 1000 Ω
•     Storage temperature: 20 ° C to 70 ° C
•     Operating temperature: 10 ° C to 55 ° C
•     Equivalent noise level: 18 dB-A for IEC 61672-1 / 27 dB CCIR for CCIR 468-3
•     Power supply: x4 phantom powering (P48) for IEC 61938 (48 ± 4 V), 3.5 mA each
•     Sensitivity: 31 mV / Pa
•     Air humidity: Maximum for 90% at 40 ° C
•     Mixing for configuration B: W = FLU + FRD + BLD + BRU / X = FLU + FRD - BLD - BRU / Y = FLU - FRD + BLD - BRU / Z = FLU - FRD - BLD + BRU

 Package contents

x 1 Microphone Sennheiser Ambeo